I built my own PC and it was super easy - here's how to do it

TI_Graphics_Computer 4x3
Skye Gould/Tech Insider

A few weeks ago, I decided to build my own computer — specifically one that can handle running high-resolution video games.

Advertisement

I could've just bought a ready-made PC from Asus or Alienware, two of the most well-known gaming PC brands. But I like the idea of choosing the parts that go into my computer so I know exactly how much they cost and I can pick them based on my personal preferences.

Plus, building your own computer is actually easier than most people might think, and it's incredibly fulfilling and satisfying, too! All you need is the parts and a screwdriver.

I should note that this PC cost me a lot of money, but you can build a fantastic gaming PC for between $500 and $600.

Here's how I built my very own high-end gaming PC, and how you can do it too.

Advertisement

See that big white case on the left? I'm going to put all these labeled parts into that case to make a super-powerful computer that will play video games in 4K.

pc build parts
Antonio Villas-Boas/Tech Insider

In case you want to build a PC exactly like mine, I'll list each component as they come up. There's also a full list of everything I used at the very bottom of this story.

Advertisement

This is the motherboard, which acts as the host to most of the parts.

pc_build_motherboard
Antonio Villas-Boas/Tech Insider

This is the Gigabyte G1 Gaming GA-Z170X 7 motherboard — you can buy it here. It's specifically designed for gaming, as it has some extra features that gamers will appreciate, like better internet performance. Gaming motherboards are also often built at a higher quality than regular motherboards, which means they're often more expensive, too. 

To be honest, gaming motherboards are overkill for most gamers, including myself. However, I chose a gaming motherboard because I went for quality over value with this build.

 

Advertisement

I started by installing the CPU (the square thing I'm holding) into the motherboard. It's probably the easiest part of the whole build.

pc build cpu install
Antonio Villas-Boas/Tech Insider

The CPU is the brain of a computer, as it's coordinating pretty much everything that's going on in the computer.

I bought the Intel Core i7 6700K processor — you can buy it here. It's one of the most powerful CPUs you can get at the moment and it's total overkill for today's gaming needs, as you can run games pretty smoothly with older and less powerful CPUs.

However, I'm planning to make this computer last a long, long time, so I wanted to future-proof it as much as I could with a powerful CPU that'll exceed specifications for several years.

The CPU is installed and ready to go after I close the clasp that holds it down!

pc build motherboard cpu
Antonio Villas-Boas/Tech Insider

The clasp is extremely tight on the CPU. I thought I was doing it wrong and it was going to break the chip, but everything was lined up and there was no reason for anything to go wrong.

Advertisement

Now it's time to install the RAM into its designated slots.

pc build RAM install motherboard
Antonio Villas-Boas/Tech Insider

I got two sticks of the latest DDR4 RAM, with 16GB of RAM each for a total of 32GB of RAM, which is totally unnecessary and excessive. The brand is Corsair and the model name is Vengeance LPX. You can buy it here.

The RAM is a computer's short term memory where it stores all the apps and files you've opened since turning on the computer, which lets you re-open those apps and files quickly. It's as easy as plugging in a USB mouse into your computer.

Advertisement

Now it's time to whip out the case and peel back that plastic film over the window panel. So satisfying.

pc case plastic film
Antonio Villas-Boas/Tech Insider

This case is called the Fractal Design Define R5 — you can buy it here. I opted for a windowed side-panel because I had never used one before, and I wanted to show off the powerful-yet-pricey parts, mostly to myself.

I also went with a white color theme to be a little different, as so many PCs are drab and black. 

Advertisement

Here's the case after removing the side panel. This is where all the parts go.

pc case inside
Antonio Villas-Boas/Tech Insider

The cables and wires that connect parts to other parts all go on the other side of the case, which has a dedicated cabling section.

inside pc case cabling section
Antonio Villas-Boas/Tech Insider
Advertisement

Before the build, it's important to feed your body and soul for the adventure ahead.

pc build sandwich
Antonio Villas-Boas/Tech Insider

This is a roast beef and cheddar sandwich with olive oil mayo and potato bread. Untoasted. I can't guarantee any PC build will work if you deviate from these sandwich specifications. 

Advertisement

Once the feeding process was complete, I took out the "drive cages" that usually house hard drives and CD drives on the right of the case.

pc build drive cages out
Antonio Villas-Boas/Tech Insider

One of the reasons I picked the Fractal Define R5 case is because it lets you remove all the drive cages.

Since I'll only be using one SSD for storage, I don't need any of these drive cages, which take up space and block airflow from the fans once the computer is up and running. 

Advertisement

It's time to install the motherboard's "I/O shield." It's important to do this before installing the motherboard because you can't add the shield afterwards.

pc build motherboard interface plate
Antonio Villas-Boas/Tech Insider

The I/O shield goes in pretty easily, but it can be finicky.

pc build mobo interface installed
Antonio Villas-Boas/Tech Insider
Advertisement

And now I can install the motherboard using screws and the included standoffs to attach it to the case.

pc build mobo installed
Antonio Villas-Boas/Tech Insider

All motherboards will come with instructions on how to install them into cases, and it's simple. 

You just need to make sure that you're getting the right size motherboard for your case. This motherboard is an ATX size, which fits in mid-size tower cases. You can fit other sizes in mid-size tower cases, like micro ATX and mini ATX, which are pretty much the only motherboard sizes you really need.

Advertisement

Next up, installing the CPU cooler, which will, er, cool the CPU.

pc build fan skitched
Antonio Villas-Boas/Tech Insider

If there's one thing that CPUs hate, it's heat, so it's a good idea to get a good CPU cooler. I ended up choosing the Enermax ETS-T40F-W — you can buy it here

This particular cooler is a radiator that sits on top of the CPU and sucks up all the heat into those metal fins in the radiator. Fans on either side of the radiator blow cool air through the fins so it can keep absorbing the heat from the CPU.

It comes pre-assembled the way it's shown above, but you can add another fan on the right side if you want.

Advertisement

Before installing the cooler, I needed to add a smidgen of what's called thermal compound, which helps transfer the CPU's heat to the cooler's radiator. I just dabbed a little bit of it right on top of the CPU.

thermal paste better
Antonio Villas-Boas/Tech Insider

This thermal compound is popular among PC builders, and it's called Arctic Silver 5. You can buy it here.

The CPU cooler is in and ready to keep things nice, chilly, and operational.

pc build cooler on cpu
Antonio Villas-Boas/Tech Insider
Advertisement

At this point, I wanted to see if the the parts I had installed were working. But before I could do that, I had to install the power supply unit and plug the power cables into the motherboard and all the parts connected to it.

pc build power supply cables
Antonio Villas-Boas/Tech Insider

This power supply unit is the Corsair RM650X. You can buy it here.

If the power supply unit was compared to a body part, it would be the heart, as it's pumping power through to all the parts in the computer.

The computer's now ready for its first test boot.

pc build psu in
Antonio Villas-Boas/Tech Insider
Advertisement

And it didn't work!

pc build test boot 1
Antonio Villas-Boas/Tech Insider

The motherboard's own basic display flashed the error code "55." After looking it up in the motherboard's manual, I learned that "55" meant there was an error with the RAM.

pc build motherboard error code
Antonio Villas-Boas/Tech Insider
Advertisement

I checked the RAM and noticed one of the sticks wasn't quite pushed all the way into its slot, and it was sitting higher than the other.

pc build RAM installed
Antonio Villas-Boas/Tech Insider
Advertisement

I tried booting up again after making sure the RAM was well seated into its slot, and it worked! The build continues.

pc build test boot
Antonio Villas-Boas/Tech Insider

The screen is showing what's called the BIOS. It's the motherboard's own operating system designed for tweaking and maintenance for your computer parts.

The reason why it's not running Windows at that time is because I hadn't yet installed the SSD where I had Windows 10 installed.

Advertisement

Now it's time to install the graphics card. This is the most important part of a powerful gaming PC, and it's the most expensive.

pc build GPU install skitched
Antonio Villas-Boas/Tech Insider

The graphics card is the muscle of your machine, as it provides the processing power for super-smooth gameplay and super-high resolutions. For this build, I went with the EVGA GeForce GTX 1080 SC, which you can buy here.

I fit the graphics card into its designated slot, right underneath the CPU cooler.

pc build gpu installed skitched
Antonio Villas-Boas/Tech Insider
Advertisement

None of this would be useful if I didn't have internet, and since I don't have Ethernet in my house, I had to get a WiFi adapter card.

pc build wifi card install
Antonio Villas-Boas/Tech Insider

Surprisingly, few motherboards come with built-in WiFi. At the same time, built-in WiFi probably wouldn't be very good anyway, so you're always better off getting a dedicated WiFi card.

This WiFi card it the Asus PCE-AC56 802.11ac Dual-band Wireless AC1300 PCI-E Adapter. Such a memorable model name. You can buy it here.

The WiFi card fits underneath the graphics card.

pc build wifi card installed
Antonio Villas-Boas/Tech Insider
Advertisement

Then it was time to install the SSD for storage. Thankfully, this case has SSD mounts in the cabling section. This is before I added the power and data cable to the SSD.

pc build ssd installed
Antonio Villas-Boas/Tech Insider

For the SSD, I went with the Samsung 850 EVO 500GB. You can buy it here.

I just needed to connect the odd cable here and there for things like the case's power buttons, power LEDs, and audio jack at the front, and I was basically done. Time to see if it all works!

pc build nearly complete
Antonio Villas-Boas/Tech Insider
Advertisement

IT IS ALIVE! But I wasn't done with it just yet...

pc build test boot 2 works
Antonio Villas-Boas/Tech Insider

After a couple days of tweaking and testing, I eventually switched out the original white CPU cooler with a liquid-based cooler because it was quieter.

pc build post wc off skitched
Antonio Villas-Boas/Tech Insider

For the liquid-based CPU cooler, I went for the latest Corsair Hydro Series H115i — you can buy it here.

Advertisement

It's similar to the white CPU cooler, except water in the pump absorbs heat from the CPU.

pc build water cool closeup skitched
Antonio Villas-Boas/Tech Insider

That hot water is pumped through a tube to the large radiator.

pc build we radiator skitched 2
Antonio Villas-Boas/Tech Insider
Advertisement

Heat in the radiator is blown away by these two fans in the front of the case. The water-based cooler kept the CPU cooler than original cooler while producing less noise. It also doesn't look as bulky in the case.

pcbuild front fans post wc
Antonio Villas-Boas/Tech Insider

I also went on to add ridiculous LED lights because why not.

pc build LED lights
Antonio Villas-Boas/Tech Insider

You can buy the LED strips I bought here.

Advertisement

All in all, it looks pretty sweet!

pc build final
Antonio Villas-Boas/Tech Insider
Advertisement

Here's a complete list of the parts I used.

pc build final
Antonio Villas-Boas/Tech Insider

Just so you know, this computer is excessively powerful for the average gamer, and it's pretty expensive, too.

Case: Fractal Design Define R5

Motherboard: Gigabyte G1 Gaming GA-Z170X 7

CPU: Intel Core i7 6700K

CPU fan: Enermax ETS-T40F-W

CPU water cooler: Corsair H115i Hydro Series

Thermal compound: Arctic Silver 5

RAM: Corsair Vengeance LPX DDR 4 32GB

Graphics cars: EVGA GeForce GTC 1080 SC

SSD: Samsung 850 EVO 500GB

Power supply unit: Corsair RM650 X

WiFi card: Asus PCE-AC56 802.11ac Dual-band Wireless AC3100 PCI-E Adapter.

LED lighting: DeepCool RGB 330

All those parts came to a total of around $2,000. I must add that I had little regard for money on the day I decided to buy these parts, which is incredibly silly. At the same time, this computer will last me a long, long time, and I won't need to buy parts for several years to come. And as I mentioned earlier, I went with quality over value for this particular build.

Gaming Video Games Microsoft
Advertisement
Close icon Two crossed lines that form an 'X'. It indicates a way to close an interaction, or dismiss a notification.